User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 31 of 43
b) Install fresh roll
1
2
3
4
5
6
Ensure the paper will feed correctly. To do
this; activate the EngBench program and
select the icon to launch the Printer
Test dialog.
Click Load Paper. Allow 30cm of paper to
feed. Click the Load Paper icon again to
end the feed.
Doing this ensures that the paper is aligned
correctly and so prevents paper jams
during operation.
Rotate until both
flanges are
aligned and
locked.
IMPORTANT:
Ensure the
flange heels are
seated correctly
in the printer roll
holds.
IMPORTANT:
Feed paper
under plastic
guide.
Feed paper
through
jaws.
Close jaws
and tear off
excess
paper.
Close case
when done.