User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 29 of 43
b) Install fresh paper roll
1
2
3
Paper autofeeds if an autofeed mechanism is
installed, and if power is ON.
4
5
6
7
Ensure the paper will feed correctly. To do this;
activate the EngBench program and select the
icon to launch the Printer Test dialog.
Click Load Paper. Allow 30cm of paper to
feed. Click the Load Paper icon again to end
the feed.
Doing this ensures that the paper is aligned
correctly and so prevents paper jams during
operation.
Rotate until both
flanges are
aligned and
locked.
IMPORTANT:
Ensure the
flange heels are
seated correctly
in the printer roll
holds.
With the green
lever in the
upright position
feed paper
under black
roller.
Flip down the
release lever.
Tear off excess
paper ensuring the
tear is clean.
Firmly push
down the
paper cutter.
Re-attach
printer
cover.