User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 22 of 43
8. Testing the Printer
8.1 Removing transit packaging (CST7000 printer only)
CST7000 printers require the removal of the orange transit clip prior to operating the printer.
To do this:
1
2
Open printer mechanism and release the black
lever.
Remove the orange transit clip. Close the
black lever, and close the printer
mechanism.
8.2 Verifying print function
Make sure that the paper roll has been loaded. For instructions on doing this refer to: Changing printer
paper: CST7000 printer on page 28, or Changing printer paper: CST7001 printer on page 30
depending on your printer model.
To test the printer:
1. From the EngBench utility, click the icon to display the Printer Test dialog.
Orange transit clip
Black lever