User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 15 of 43
5. Powering-On the Devices
To power-on the devices:
1. Ensure that the power plug is properly inserted in the power board and that the power board
ON switch is activated.
2. If the power board is fitted with a light indicator, verify that the light is illuminated.
3. Verify that the scanner green power-on light is on.
4. For ECP printers only, verify that the red barcode reader light is on. USB printers require
initialisation before the barcode reader light illuminates. Initialisation for USB printers is detailed
in the next section. The red illumination remains ON at all times. LEDs (Light Emitting Diodes)
produce the barcode illumination. They are NOT a laser light source, and they are safe.
Red Illumination
Power indicator light