User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 13 of 43
4. Setting-up Hardware
The method for data connections for ECP devices is different between ECP and USB devices. USB
devices connect separately, ECP devices connect in „daisy-chain‟.
4.1 Connecting the printer
1. Place the printer upside down.
2. Insert the tip of a small flat screwdriver into each latch access hole and gently pry each end up.
3. Connect the data connector and power supply connector, placing the cables in the grooves.
ECP Printer
USB Scanner
Press-in release latch
using a screw driver