User manual

Cyberview scanner and thermal printer - Installation and User Manual 15 October 2007
Commercial-in-Confidence Page 10 of 43
service for that port and configure its interrupt settings. This will usually be LPT1 unless your
PC has two printer ports and one is already in use by a non-Cyberview device. If your
machine does not have a parallel port, please select „USB only‟.
6. Click Next.
The driver installation should complete and prompt you to click Finish when done.
3.2.2 Installing SDK software
The SDK provides the EngBench utility required for setup as well as a number of sample files and
applications.
To install the SDK files:
1. Click Install Printer / Scanner SDK from the installation menu.
2. Follow the Wizard to install the SDK files onto your hard drive. During the installation you are
given the option to perform a Complete install or a Custom install. The following software is
installed during a complete install. You can choose to remove some or all of these components
by performing a Custom install.
EngBench
EngBench is Cyberview software that allows you to perform various
scanner functions such as: scanner initialisation, testing, and calibration.
EngBench is required if you are to be using the scanner in its default setup
using the standard drivers.
EngBench Special Versions contains a specific version for 3D barcode
decoding.
BMP2PRN
BMP2PRN is a simple command line tool that converts BMP images to
PRN format for use on printer output.
Device Drivers
The Device Drivers for all supported platforms will be saved to the hard-
drive. The drivers for Windows 2000 and Windows XP are automatically
installed when Install Printer/Scanner Drivers is selected from the
installation main screen.
Imaging
Legacy ISIS and TWAIN compliant scanner imaging drivers for Windows