User's Manual

3. Introduction
The WU260-A1-AM is a Draft IEEE802.11n-compatible USB module in a 2x2 MIMO
configuration and operating in the 2.4 and 5GHz ISM band. This module allows an
embedded host to use its USB 1.1 or 2.0 interface to connect to a Draft IEEE802.11n
compatible access point at unprecedented speeds.
The WU260-A1-AM USB module is based on Broadcom’s BCM4323 65nm chipset. It
provides greater than 100Mbps real world throughput using high-speed spatial
multiplexing modes. Configuration and testing of this module must be done on the host via
Broadcom provided software tools..
4. Features
• USB v2.0 compatible.
• Board-to-Board connector to the host PCB’s needs.
• Backward compatible with USB v1.1.
• Draft IEEE 802.11n version 2.0 compatible.
• Backward compatible with IEEE 802.11b/g standards.
• Wire-free access to networked resources from anywhere beyond the TV.
• Delivers data rate up to 300 Mbps.
• 802.11n: Dynamically shifts among 130, 117, 104, 78, 52, 39, 26 and 13Mbps in
a 20MHz bandwidth and 270, 243, 216, 162, 108, 81, 54 and 27Mbps in a 40MHz
bandwidth, based on signal strength, for maximum availability and reliability of
connection.
• 802.11a/g: Dynamically shifts among 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
network speed, based on signal strength, for maximum availability and reliability
of connection.
• 802.11b: Dynamically shifts among 11M, 5.5M, 2M, and 1 Mbps network speed,
based on signal strength, for maximum availability and reliability of connection.
• Uses 2.4 and 5GHz frequency band, which complies with worldwide non-license
bands.
• Ensures great security by providing the 64/128 bits Wired Equivalent Privacy
(WEP) and WiFi Protected Access
• Protected Access (WPA) defined in the IEEE standard.