User's Manual

Broadband Security Router User Guide
- 15 -
Chapter 3: Internet Access
This chapter describes the procedures necessary to configure the basic functions and
begin using your High-Performance Wireless Router. If you follow these procedures
correctly, there should be no problem in accessing the Internet via your
High-Performance Wireless Router.
Prepare your network information
In order to allow quick referencing when setting up your High-Performance Wireless
Router, it is suggested you complete the table below with the necessary information. It
should be supplied by your ISP.
Provided by some ISPs Host Name:
Domain Name:
IP address given by ISP:
| Obtain IP Address automatically
| Static IP
IP Address: ____.____.____.____
Subnet Mask: ____.____.____.____
Default Gateway: ____.____.____.____
DNS Server Primary: ____.____.____.____
DNS Server Secondary: ____.____.____.____
DNS Server Third: ____.____.____.____
PPP authentication: | PPPoE
| PPTP
Login Name:
Password: ________________
Web-based User Interface
Your High-Performance Wireless Router is designed to use a Web-based User Interface
for configuration. After connecting your router and your computer, please open your
web browser and type http://192.168.1.1
in the browser’s address box. This address is
the factory set IP Address of your High-Performance Wireless Router. Press “Enter”.