User's Manual

Broadband Security Router User Guide
- 10 -
In the “Local Area Connection Status” window, click the “Properties” button
then your Network window will appear.
There is only one tab, “General”, in the Network window.
3. Check whether the TCP/IP Protocol has already been installed onto your
computer’s Ethernet card. Note that TCP/IP Protocol can be installed for a
computer’s Dial-Up Adapter as well as for the Ethernet card.
- If yes, go to step 7.
- If no, click the “Add” button.
4. Double-click “Protocol” in the Select Network Component Type or highlight
“Protocol” then click “Add”.