User's Manual

Broadband Wireless Router User Guide
- 28 -
28
re-initialize the unit without affecting any of your configuration setting.
 Factory Defaults Select “Yes” if you want to return all the router’s current
settings to their factory defaults. Note that do not restore the factory defaults
unless it is absolutely necessary.
Click “Apply” after making any changes.
4-7 Status Monitor
This screen shows the router’s current status. All of the information provided is
read-only.
 Login This column shows the login information of PPPoE or PPTP. You can
manually initiate the connection or make a disconnection by clicking the
appropriate buttons. Be aware that, if you make a disconnection here,
“Connect-on- demand” will not function until the connection button is
clicked. Note that “Login” won’t show any information if you selected
“Obtain IP automatically” or “Static IP” on the OnePage Setup page.
 Internet This section shows the IP settings status of the router as seen by
external users of the Internet. If you selected “Get IP Address
Automatically”, “PPPoE”, or “PPTP” in the OnePage Setup, the “ IP
Address”, “Subnet Mask”, “Default Gateway”, and “Domain Name
Server” (DNS) will show the information retrieved from the DHCP server
or ISP which is currently being used. If you selected “ Static IP” in “One
Page Setup: Public IP Address”, the information will be the same as your