User's Manual

Broadband Wireless Router User Guide
- 25 -
25
DMZ Host
1. Before setting up a LAN PC to act as a DMZ Host, you should configure it
using a fixed IP Address.
2. In the “One Page Setup” screen, ensure the Private IP Address is set to the
Broadband Wireless Router’s default setting of 192.168.1.1. In the Public IP
Address area, select “Specify an IP Address”, and then enter the IP Address
and other necessary information provided by your ISP.
3. Click the “DMZ Host” option in the Advanced Menu and enter the fixed IP
Address of the Exposed Host PC in the “DMZ Host” IP Address location.
Remember, entering “0” will disable this application.
Multi DMZ
4. Enter the valid public IP address in “WAN IP” column. Next, enter the
private IP address of the PC that you wisht to map to in “LAN IP” field. Up
to five public IP addresses can be entered.
5. Click “Apply” to save the setting after making any change.
4-5 Special Applications
Some applications use multiple TCP/UDP ports to transmit data. Due to the NAT,
these applications cannot work with the Broadband Wireless Router. Port
Triggering allows some of these applications to work properly. Note that only
one PC can use each Port Triggering setting at any time.