User's Manual

WM821-M MiniPCI Module —Using the Wireless Utility
Boost Mode Select this check box for performance enhancement.
Enable WMM
Select this check box to enable/disable the Wireless Multimedia Enhancements (WMM)
feature.
Worldwide regulatory domain Select this check box to set the regulatory domain
DFS Mode Select this check box to enable Dynamic Frequency Selection (DFS)
MIMO Powersave
Enables/disables the Multiple Input Multiple Output (MIMO) Powersave Mode. Available
options are Off and Static.
3.6 AutoLink Tab
To enable AutoLink mode, proceed as follows:
1. 1. Toggle the AutoLink button on the Access Point to enable AutoLink mode.
2. 2. Toggle the AutoLink button on the client to enter AutoLink mode.
Figure 38: Access Point Autolink Button
Within 60 seconds, the AutoLink will be completed.
Figure 39: Auto Link Tab (Client)
AutoLink is complete.
26