User's Manual

Table Of Contents

Appendix B Error Messages of Enabler Program

. • Auto Switch—Auto Select Authentication modes (Open System or Shared

. Key, WEP key required)

. • WPA-PSK—WPA Pre-Shared Key

. • WPA2-PSK—WPA2 Pre-Shared Key

3.2.2.2 EAP Authentication Modes

The WM821-M Configuration Utility currently supports the following EAP authentication modes:

. • 802.1x (TLS/PEAP)

. • WPA (TLS/PEAP/LEAP)

. • WPA2 (TLS/PEAP/LEAP)

. • CCX (LEAP)

3.2.2.2.1 WPA-PSK/WPA2-PSK SUPPORT

In Infrastructure mode, if WPA-PSK/WPA2-PSK is selected as the Authentication Mode, the encryption method AES or TKIP can be

selected.

Figure 13: Security selection

Figure 14: Security Tab—WPA-PSK/WPA2-PSK with TKIP

Enter the network passphrase into the Passphrase and Confirm boxes.

Note

WPA-PSK/WPA2-PSK is not supported in Ad-Hoc network mode.

3.2.2.2.2 802.1X/WPA/WPA2 EAP/TLS SUPPORT

If the 802.1x EAP/TLS option is selected, the encryption method AES or TKIP can be selected, and a certificate is required for the

authentication.