User's Manual

WM821-M MiniPCI Module —Using the

Wireless Utility

DFS Mode

Select this check box to enable Dynamic

Frequency Selection (DFS)

MIMO Powersave Enables/disables the Multiple Input Multi-

ple Output (MIMO) Powersave Mode.

Available options are Off and Static.

3.6 AutoLink Tab

To enable AutoLink mode, proceed as follows:

1. 1. Toggle the AutoLink button on the Access Point to enable AutoLink mode.

2. 2. Toggle the AutoLink button on the client to enter AutoLink mode.

Figure 38: Access Point Autolink Button

Within 60 seconds, the AutoLink will be completed.