User's Manual

Appendix B Error Messages of Enabler Program
19
Network Type
• Infrastructure When an Infrastructure network is selected,
the Profile Setting displays the Wireless Mode field.
Wireless Mode
• Auto
Connects to 802.11a network, 802.11g network, or 802.11b
network (Infrastructure network only).
• 802.11a
Connects to 802.11a only.
• 802.11g Connects to either 802.11g network or 802.11b
network.
• 802.11b
Connects to 802.11b network only.
802.11n Network Enables/disables draft-802.11n/EWC functionality.
If enabled, the Modulation and Coding Scheme (MCS) index
and 802.11n options can
be configured.
Channel Width
Sets the channel bandwidth. Available options are Auto, 20
MHz, and 40 MHz.
The default is Auto.
Guard Interval
Sets the Guard Interval. Available options are Auto, Standard,
and Short.
The default is Auto.
Extension Channel
Sets the extension channel mode when bandwidth is 40 MHz.
Available options are
Auto, None, Lower, and Upper. The default is Auto.
Antenna Selection
Sets the antenna selections. Available options are Auto, An-
tenna A, Antenna B, 2 by 2,
and 2 by 3. The default is Auto.