User Manual

• This field contains the following values:
o No Power Save
o Max Power Save
• IBSS Protection combo box – Independent Basic Service Set protection can be one of the following:
o None
o TI Protection
o CTS Only
• 4x Config radio button – select “4x enable” to enable 4x mode, and “4x disable “to disable it.
• Tx Power Level combo box – Transmit power level. Can be one of the following:
o Low Power
o Medium-Low Power
o Medium-Power
o Medium-High Power
o High Power
• Mode combo box – selection of one of the standard 802.11 operating modes:
o B-Only Mode
o B-Plus Mode
o B&G Mode
o G-Only Mode
o A-Only Mode
o A&G Mode
• Profile – Save a profile or load a stored profile. To save profile, enter a profile name within the combo box and
press save. To load an existing profile, choose the profile name from the comb box and press load. All of the
current configuration parameters will be changed to the saved profile parameters.
Revision 0.1
10