User's Manual

11g Wireless Security Router User Guide
- 45 -
Wireless Station Status:
The “Active MAC Table” shows the MAC addresses of
wireless clients, which have the same ESSID and WEP key
with Wireless Security Router. When the “MAC Filter”
function is disabled, the background color is gray.
Click the “Active MAC Table” button will display all MAC
addresses of wireless nodes on your WLAN.
If the MAC Filter function is enabled and the MAC addresses
showing in this table have been entered into the “Edit MAC
Filter” table, the background color of those MAC addresses
will be green. Otherwise, it should be red. If the MAC
addresses have been blocked (check the Filter field beside the
MAC address in Edit MAC Filter table), the background color
will be yellow.
Wireless Station MAC
Filter:
This function allows you to restrict wireless users to access
Internet.
Click “Edit MAC Filter Setting” button to open the edit
table.