User's Manual

11g Wireless Security Router User Guide
- 39 -
4-8 Special Applications
Some applications use multiple TCP/UDP ports to transmit data. Due to the NAT, these
applications cannot work with the Wireless Security Router. Port Triggering allows some
of these applications to work properly. Note that only one PC can use each Port
Triggering setting at any time.
Application name:
Enter the name of application you wish to configure in the
Name column to identify this setting.
Outgoing Port Range:
Enter the port number or range numbers this application uses
when it sends packets outbound. The Outgoing Control Port
Numbers act as the trigger. When the Wireless Security Router
detects the outgoing packets with these port numbers, it will
allow the inbound packets with the Incoming Port Numbers
that you set in the next column to pass through the Wireless
Security Router.
Incoming Port Range:
Enter the port number or range numbers the inbound packets
carry.
Apply
Click this button after making any changes for activating the
settings.