User's Manual

59
you selected “ Static IP” in “One Page Setup: Public
IP Address”, the information will be the same as your
input.
DHCP Release:
Click this button to eliminate the IP address obtained
from DHCP server.
DHCP Renew:
Click this button to refresh the IP address from DHCP
server.
Note that the “DHCP Release” and “DHCP Renew”
button only show up when you select “Get IP Address
Automatically” in the OnePage Setup.
Intranet:
This section displays the current “Private IP Address”
and “Subnet Mask” of the router, as seen by users of
your internal network.
DHCP Clients Table:
If the router is setup to act as a DHCP server, the LAN
side IP Address distribution table will appear by
clicking this button.
5-3 Log
The Log application provides the administrator with the ability to trace Internet connection.
With viewing the Log information, an administrator can send the record to a specific LAN PCs
to have the real time monitor.
Log:
Check the “Enable” option if you want to activate this
function.
Send Log To:
Enter the IP address of the PC that you wish to use to
ihLif i