User's Manual

Administrator

Password:

Enter the password you want to use into the

“Password Change” field and re-enter it into the

“Password Confirm” field for confirmation. Be sure

that the password is less than 64 characters long and

without any special characters or spaces..

SNMP Function:

As with the Password, SNMP community allows

authorized persons to access this router through the

SNMP Management tool. The Wireless Broadband

router provides three fields to enter these communities.

The default words Public and Private are well-known

communities that allow authorized persons who know

the IP Address of this router to access the read-only

information about this router or have the authority to

change the configuration. Also, the administrator can

define any specific community and configure its limits

as Read-Only or Read-Write from the right side

drop-down box.

WAN MAC Change:

The WAN MAC address can be changed from the

original values if necessary. Some ISPs require users

to change the WAN MAC address to a registered one

when users change their access equipment.

External Admin.:

Check “Enable” to allow you to configure the

Wireless Broadband router from the WAN side. To

access the setting page from the external side, enter

“http://<WAN IP Address>:8080” into the web

browser address bar and press the “Enter” key.

MTU:

Check Enable if you want to set a maximum

limitation for incoming and outgoing packet size.

Enter the maximum packet size you wish to set in the

“Size” column.

Block WAN Request:

To prevent hacker intruding your network, check the

Enable option to enable this function to reject all the

unauthorized requests from WAN side.

IPSec Pass Through:

Check the Enable to allow the IPSec packets to pass

through the Wireless Broadban

d router if there is LAN