User's Manual

51
type. If you are not sure, select both.
Station MAC Filter
This function allows you to restrict wireless users to access
Internet. As for the MAC table, you need to click” Active
MAC Table” button, entering to the “Wireless Active
MAC table” page, press “Update Filter List” button and
update the list again.
Active MAC Table
The “Active MAC Table” shows the MAC addresses of
wireless clients, which have the same ESSID and WEP key
with Wireless Broadband router. When the “MAC Filter”
function is disabled, the background color is gray.
Click the “Active MAC Table” button will display all
MAC addresses of wireless nodes on your WLAN.
If the MAC Filter function is enabled and the MAC
addresses showing in this table have been entered into the
“Update Filer List” table, the background color of those
MAC addresses will be green. Otherwise, it should be red.
If the MAC addresses have been blocked (check the Filter
field beside the MAC address in Update Filter List table),
the background color will be yellow.
Update Filter List:
This function allows you to restrict wireless users to access
Internet.
Click “Update Filter List” button to open the edit table.