User's Manual

47
Select Route entry:
Select the route entry number from 1 to 20 that you
wish to configure.
Delete this entry
Delete the selected route entry information.
Destination LAN IP
and Subnet Mask:
Enter the IP Address and Subnet Mask of the
destination LAN that the immediate LAN is to
communicate with. Taking the above diagram as an
example, enter 192.168.2.0 in the “Destination LAN
IP” field and 255.255.255.0 in the “Subnet Mask”
field.
Default Gateway:
Enter the IP Address of the router that forwards data
packets to the destination LAN. For the above
example, enter 192.168.1.2 in the “Default Gateway”
field.
Hop Count:
Enter the number of hops required between the LANs
to be connected. The Hop Count represents the “cost”
of the routing transmission. The default value is 1.
Interface:
Choose LAN if the Destination LAN is on your
Router’s LAN side and choose WAN if the Destination
LAN is on the Router’s WAN side.
Show Routing Table
Click this button after clicking Apply to see current
routing information.