User's Manual

45
using a fixed IP Address.
Note: In the “One Page Setup” screen, ensure the Private IP Address is set to
the Wireless Broadband router’s default setting of 192.168.1.1. In the Public IP
Address area, select “Specify an IP Address”, and then enter the IP Address
and other necessary information provided by your ISP.
Click the “DMZ Host” option in the Advanced Menu and enter the fixed IP
Address of the Exposed Host PC in the “DMZ Host” IP Address location.
Remember, entering “0” will disable this application.
Multi DMZ
1. Enter the valid public IP address in “WAN IP” column. Next, enter the
private IP address of the PC that you wish to map to in “LAN IP” field.
Up to five public IP addresses can be entered.
2. Click the “Apply” button after making any changes, or click the “Cancel”
button to exit the screen without saving any changes.
4-5 Dynamic Routing
The Dynamic Routing feature allows your Wireless Broadband router to exchange routing
information with other routers in the network. Enabling this feature is likely to enhance
performance of your Wireless Broadband router.
TX:
From the drop-down list, select one of the routing
information types, “RIP-1”, “RIP-1 Compatible”, or
“RIP-2”, to enable the “TX” (transmit) function.
“RIP-1” is the protocol used by older routers. Newer
routers should use “RIP-2”. “RIP-1 Compatible”
servers to broadcast RIP-1 and multicast RIP-2.
RX:
From the drop-down list, select one of the routing
information types, “RIP-1” or “RIP-2”, to enable the