User's Manual

IP Access Setting

This function allows network administrators to restrict up to five groups of

specified network users/computers from accessing the certain applications

Protocol:

Select the protocol type as “TCP” or “UDP” from the

drop down list. If you are not sure which one to

choose, select “Both”.

Filter Group/LAN IP

Range:

Enter the range of IP addresses which you want them

to be a controlled group to have the same access

limitation.

Block Port Range:

Enter the range of port numbers which are used by the

applications you wish to be blocked.

Here is an example for the IP Access Setting. Enter the range of 51~80 in the

Filter Group column and 20~80 in the Block port Range column, then click

“Apply” button. As the result, the user’s computers which have IP Addresses in

the range of 192.168.1.51 to 192.168.1.80 will not be able to use the

applications which use port numbers from 20 to 80, such as FTP, Telnet and