User's Manual

to restore itself. You may need to check with your

ISP to obtain detail of how long you need to wait

before re-establish the HBS session. Enter this

information in the “Redial Period” field.

When you have properly configured the Setup page, click “Apply”. You can

now test to see if the settings are all correct by attempting to connect to the

Internet.

IP Unnumbered(PPPOE)

IP unnumbered allows you to do IP processing on a serial interface without

assigning an explicit IP address for point-to-point links. If your ISP uses IP

Unnumbered(PPPOE) to establish the connection, you should select this item

and follow the steps below.

User Name:

Enter the user name your ISP provides you.

Password:

Enter the password your ISP provides you.

Connect-on-demand:

It is a utility used to trigger the IP Unnumbered

(PPPoE) session when there is a packet being sent

through the WAN port while it is on disconnected

situation. Check the radio button to make this

function active, and then you must enter the

number of minutes you wish the network to

remain idle before disconnection occurs in the

“Max Idle Time” location.

Keep Alive:

This function keeps your IP Unnumbered

(PPPoE) connection enable even if it remains idle.