User's Manual

31
situation, PPTP session cannot be established
immediately after disconnection. This is because
the system on the ISP’s site may need a little time
to restore itself. You may need to check with your
ISP to obtain detail of how long you need to wait
before re-establish the PPTP session. Enter this
information in the “Redial Period” field.
HBS
If your ISP uses HBS to establish the connection, you should select this item
and follow the steps below.
User Name:
Enter the user name provided by your ISP.
Password:
Enter the password provided by your ISP.
Heart Beat Server:
Enter the IP address provided by your ISP. This
setting is available only for some areas. Check
your ISP for more detailed information.
Connect-on-demand:
It is a utility used to trigger the HBS session when
there is packet being sent through the WAN port
while it is on disconnected situation. Check the
radio button to make this function active, and then
you must enter the number of minutes you wish
the network to remain idle before disconnection
occurs in the “Max Idle Time” location.
Keep Alive:
This function keeps your HBS connection enable
even if it remains idle. However, in some
situation, HBS session cannot be established
immediately after disconnection. This is because
the system on the ISP’s site may need a little time