User's Manual

The “Username and Password Required” prompt box will appear. Leave the

Username field empty and type “admin” (default password) in the Password

field. Click “OK”. The setup screen will then appear.

Basic Configuration – Setup

The “OnePage Setup” screen is the first screen you will see when you access

the Utility. If the router has already been successfully installed and set up, this

screen’s values will already be properly configured.

Host Name: This entry is required by certain ISPs.

Domain Name: This entry is required by certain ISPs.

Time Zone: Select the time zone of your location from the drop

down list.

Private IP Address: The “Device IP Address” and “Subnet Mask” of the

router are used for the internal LAN. The default values are

192.168.1.1 for the IP Address and 255.255.255.0 for the

Subnet Mask.

Wireless

Check “Enable” or “Disable” to make the wireless LAN function active or