User's Manual

Chapter 3: Internet Access

This chapter describes the procedures necessary to configure the basic functions

and begin using your 11g Wireless Broadband Router. If you follow these

procedures correctly, there should be no problem in accessing the Internet via

your 11g Wireless Broadband Router.

Prepare your network information

In order to allow quick referencing when setting up your 11g Wireless

Broadband Router, it is suggested you complete the table below with the

necessary information. It should be supplied by your ISP.

Provided by some ISPs Host Name:

Domain Name:

IP address given by ISP:

 Obtain IP Address automatically

 Static IP

IP Address: ____.____.____.____

Subnet Mask: ____.____.____.____

Default Gateway: ____.____.____.____

DNS Server Primary: ____.____.____.____

DNS Server Secondary: ____.____.____.____

DNS Server Third: ____.____.____.____

PPP authentication:  PPPoE

 PPTP

Password: ________________

Web-based User Interface

Your 11g Wireless Broadband Router is designed to use a Web-based User

Interface for configuration. After connecting your router and your computer,

please open your web browser and type http://192.168.1.1 in the browser’s

address box. This address is the factory set IP Address of your 11g Wireless

Broadband Router. Press “Enter”.