User's Manual

Wireless-G Router User's Manual
The router does not have a coaxial port for the cable connection.
The router does not have a built-in modem. You still need your cable modem in order
to use the router. Connect your cable to the cable modem and then follow the
instructions in Chapter 1.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same on both the computer and
the router. If you have enabled wireless security, then make sure the same security
method and key are used by both the computer and the router.
You need to modify the settings on the router.
Open the Web browser (for example, Internet Explorer or Firefox), and enter the
router's IP address in the address bar (the default IP address is 192.168.1.1). When
prompted, leave the User Name box blank and enter the password to the router (the
default is admin). Click the appropriate tab to change the settings.
40