User's Manual
Wireless-G Router User's Manual
voice, music, and video applications, for example,Voice over IP (VoIP), video
streaming, and interactive gaming. If you have other devices on your wireless network
that support WMM, select Enabled. Otherwise, keep the default, Disabled.
No Acknowledgement: This feature prevents the router from re-sending data if an
error occurs. To use this feature, select Enabled. Otherwise, keep the default setting,
Disabled.
Click Save Settings to apply the new settings, or click Cancel Changes to cancel
any unsaved changes.
Administration Page – Management Panel
The Administration page's Management panel lets you manage specific router
functions for access and security.
• Router Password: This section controls access to the router's setup utility.
Local Router Access: This lets you change the setup utility password.
Router Password: Enter a new password for the setup utility.
Re-enter to confirm: Enter the Password again to confirm.
• Web Access: These controls concern security and wireless access.
Access Server: HTTP (HyperText Transport Protocol) is the communications
protocol used to connect to servers on the World Wide Web. HTTPS uses SSL
(Secure Sockets Layer) to encrypt data transmitted for higher security. Select
HTTP or HTTPS. The default selection is HTTP.
Wireless Access Web: If you are using the router in a public domain where you
are giving wireless access to your guests, you can disable wireless access to the
router's setup utility. You will only be able to access the setup utility via a wired
connection if you select Disable. Keep the default, Enable, to enable wireless
access to the router's setup utility, or select Disable to disable wireless access to
the utility.
• Remote Router Access: These controls concern access to the setup utility from
the Internet.
Remote Management: To be able to access the router remotely, from outside the
network, select Enable. You will need to enter the router's password when
accessing the router this way, as usual.
Management Port: Enter the port number that will be open to outside access.
Use https: To require the use of HTTPS for remote access, select this feature.
34