Manualshelf

User's Manual

ManualsBrandsCyberTAN Technology ManualsElectronicsWireless-G Router
21222324252627282930
Wireless-G Router User's Manual
on Demand. In the Max Idle Time box, enter the number of minutes you want to
have elapsed before your Internet connection terminates. The default Max Idle
Time is 5 minutes.
Keep Alive: Redial Period: If you select this option, the router will periodically
check your Internet connection. If you are disconnected, the router will
automatically re-establish your connection. To use this option, select Keep Alive.
In the Redial Period box, specify how often you want the router to check the
Internet connection. The default Redial Period is 30 seconds.
• L2TP: The Layer Two Tunneling Protocol is a connection method used mostly in
Israel.
User Name and Password: Enter the user name and password provided by your
ISP.
L2TP Server: This is the IP address of the L2TP server. Your ISP will provide
you with the IP address you need to specify here.
Connect on Demand: Max Idle Time: You can configure the router to
disconnect from the Internet after it has been inactive for a specified period of
time (Max Idle Time). If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the router to automatically reconnect
when you attempt to access the Internet again. To use this option, select Connect
on Demand. In the Max Idle Time box, enter the number of minutes you want to
have elapsed before your Internet connection terminates. The default Max Idle
Time is 5 minutes.
Keep Alive: Redial Period: If you select this option, the router will periodically
check your Internet connection. If you are disconnected, the router will
automatically re-establish your connection. To use this option, select Keep Alive.
In the Redial Period box, specify how often you want the router to check the
Internet connection. The default Redial Period is 30 seconds.
• Telstra Cable: Telstra Cable is a connection method used in Australia only. If
you use Telstra BigPond cable service, then select Telstra.
User Name and Password: Enter the user name and password provided by your
ISP.
Heart Beat Server: This is the name or IP address of the heartbeat server. Your
ISP will provide you with the string or address you need to specify here. If no
heartbeat server is used on your connection, then leave this box blank.
Connect on Demand: Max Idle Time: You can configure the router to
disconnect from the Internet after it has been inactive for a specified period of
time (Max Idle Time). If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the router to automatically reconnect
19