User Manual

Chapter 1 - Introduction
Thank you for purchasing the CardBus Wireless LAN Card. This high-speed
CardBus Wireless LAN Card provides you with an innovative wireless networking
solution. The Adapter is easy to set up and use. With this innovative wireless
technology, you can share files and printers on the network— without inconvenient
wires!
The Adapter is a network Adapter with a rate of 1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48
and 54 Mbps operating in the IS M band using Direct Sequence Spread Spectrum
(DSSS) transmission implementing the IEEE 802.11a/g draft standard. This
Adapter provides Device Drivers for Windows Operating Systems. It also provides
tools for the configuration of the Adapter. The tool, as well as the installation
steps of the plug-and-play procedure for the Windows operating systems, is
described in this document.
Features
The CardBus Wireless LAN Card offers compliance with the IEEE 802.11a/g draft
specification. This feature allows them to communicate with other wireless
devices that support the standard. Features of the Adapter are:
l Uses 2.4GHz and 5GHz frequency band, which complies with worldwide
requirement
l Wireless interface following the IEEE 802.11a/g standard
l Using CardBus interface
l Security support WPA
l Wire-free access to networked resources from anywhere beyond the
notebook
l Allows users move between Access Points without resetting their
connection reconfiguration
l Delivers data rate up to 54 Mbps
l Supports 1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48 and 54 Mbps rates
l Provide CardBus Wireless LAN Card Configuration utility
l The Adapter uses external Antenna with LEDs indicating Power and Link
l Supports most popular operating systems