User's Manual

wireless network t hat your wireless card can connect t o. This ident ifier is
case-sensitive
and m ust not exceed 32 charact ers. The SSI D “
any
” is a special SSI D.
I t will have your wireless device connect to any available access points t hat it can
find.
Channel The channel setting is valid only when t he Operat ing Mode is set to Ad-Hoc
m ode, m eaning t here is no Access Point being used. I t allows you t o change the
channel on your network t o avoid interference from other networks.
Set Security
- this allow s you t o configure the security opt ions for this profile. A
security sett ing box will appear for you t o configure. Please refer to t he security
setting box section below for m ore inform ation.
5.4.3 Site Monitor: Finding and connecting to wireless networks
Select t he Site Monitor tab.
Site Monit or shows t he list of last found Access Points available t o your wireless
card.
The list inform at ion includes:
Network Name: This is the nam e of Access Point .
Signal Strength:
This is denot ed in percent ages