User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Configuring Basic Settings
- Configuring Advanced Settings
- Setting up the Bridge in AP Mode
- Troubleshooting DO THESE APPLY?
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
GETTING STARTED
11
MY NET AC WI-FI BRIDGE
USER MANUAL
2. Launch a web browser. The bridge’s My Dashboard Welcome page displays
automatically.
3. Select a language in the upper right corner (defaults to English) and make sure that
Mode displays bridge (the default value).
4. Click Next to display the Select an available network screen.
5. You have three options:
Select an available Network Name and click Connect.
Double-click a Network Name or its row to populate it. The Secure Network
Connection page displays. Continue to the next step.
In the Use another network field, enter the name of an additional network, and
then click Connect. The Secure Network Connection page displays. Continue to
the next step.
6. On the Secure Network Connection Password page, you have two options: NEED
GRAPHIC
Option #1– When WPS is not enabled on the router
a. Enter the network password (default?) and press Enter. The Setup Wireless page displays
the progress of the connection. The Setup Complete screen displays.