User's Manual

GETTING STARTED
10
MY NET AC WI-FI BRIDGE
USER MANUAL
2. Enter http://WDbridge? or http://192.16???230 in the address field. The Welcome
screen displays: Does it go through the whole thing with Setup Complete and
Registration?
Setting up Your bridge Manually
There are cases where you may need to set up the bridge manually, for example when:
Wi-Fi Protected Setup (WPS) is disabled, or the router does not support WPS.
Some interference is preventing WPS from working.
1. Connect the bridge using one of the following methods:
Connect an Ethernet cable from the bridge to a desktop or laptop computer.
Wirelessly connect to the bridge using your wireless-enabled computer. The
Network Name is WDbridge.
Make a wired connection between your router and the bridge.