User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Configuring Basic Settings
- Configuring Advanced Settings
- Setting up the Extender in AP Mode
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
PRODUCT OVERVIEW
6
MY NET WI-FI EXTENDER
USER MANUAL
Front LED indicators
Side Panel
Power button
WPS button
Frequency switch
F
Power port
Ethernet/Internet port
Port LEDs
LED Description
Power Steady blue when the extender is powered on and operational;
flashes slowly during
boot-up, firmware upgrades, and system self-
tests.
Wi-Fi Protected
Setup (WPS)
When connecting the extender and a wireless device (e.g., a printer)
that you want to add to the network, the LED indicates the status of
WPS:
• When WPS is connecting a network device, the light blinks slowly.
• If an error occurs during setup, the light blinks quickly.
• After setup, light is solid when WPS is active.
Wireless
strength
18 blue lights flash when you first connect to indicate the strength of
the wireless connection (signal). Helps you determine optimal
placement.
•