User's Manual

CONFIGURING ADVANCED SETTINGS
24
MY NET WI-FI EXTENDER
USER MANUAL
Resetting and Rebooting the Extender
Resetting to Factory Defaults
You may want to reset the extender to how it was when you bought it. You have two options
for restoring factory defaults: through the user interface or through the Reset button on the
bottom of the extender.
To use the user interface:
1. Click the Advanced Settings
icon and then the System tab (link).
2. Click Reset to the right of Reset to Factory Default Settings.
3. When a confirmation message displays, click OK.
4. Wait until the extender reboots before using it.
To reset the extender manually:
1. Press and hold the Reset
button on the bottom of the extender for at least 10 seconds.
When the reset finishes, the Power LED blinks.
Rebooting
You can reboot the extender two ways. If you are physically close to it, just press the On/Off
button on the extender. If you cannot easily press the button:
1. Click the Advanced Settings
icon and then the System tab (link).
2. Click Reboot.
Important: Do not reboot the extender or close the application while the update is
taking place.
WARNING! To avoid data loss, before rebooting, stop all network and read/write
activities.