User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Configuring Basic Settings
- Configuring Advanced Settings
- Setting up the Extender in AP Mode
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
CONFIGURING BASIC SETTINGS
22
MY NET WI-FI EXTENDER
USER MANUAL
b. Setup 2: If prompted by your wireless device, enter the extender’s WPS PIN shown on the
screen into your wireless device.
Note: The label on the bottom of the extender displays the default PIN. You can
change the PIN on the Wi-Fi Protected Setup screen. Once you change
the PIN, the default value is invalid unless you reset the extender to
default values. If your device requests the extender’s PIN, enter the PIN
shown on the screen.
5. Click WPS.
6. To confirm that the device has been added, click Confirm.
7. The Confirmation screen displays the attached devices in the Client Table.
8. Click OK to return to the My Dashboard home screen.