User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Configuring Basic Settings
- Configuring Advanced Settings
- Setting up the Extender in AP Mode
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
CONFIGURING BASIC SETTINGS
21
MY NET WI-FI EXTENDER
USER MANUAL
1. On the Dashboard, click the Add a Device icon.
2. If your device does not support WPS, when prompted by the device:
a. Enter the following into your wireless device’s Wi-Fi connection screen:
The Wi-Fi network name for the wireless network you want to use
The password for the wireless network you selected
Note: By default there is no password. If you establish a password during setup,
that password displays in the password field.
b. Continue to step 6 to confirm that the device has been added.
3. If the new device supports WPS, click the Click Here link at the top right of the
screen to display the Secure Network Connection screen.
4. Follow the appropriate procedure below:
a. Setup 1: Press the WPS button on the front of the extender or click the virtual button on this
screen. On your wireless device, press the physical
WPS button or click the virtual WPS
button.