User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Configuring Basic Settings
- Configuring Advanced Settings
- Setting up the Extender in AP Mode
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
GETTING STARTED
9
MY NET WI-FI EXTENDER
USER MANUAL
4. Launch a web browser and enter http://WDRangeextender or http://192.168.1.230
in the address field. The Home page of the Dashboard, the extender’s user interface)
displays.
5. Continue with “Configuring the Extender for the First Time” on page 11.
Setting up Your Extender Manually
There are cases where you may need to set up the extender manually, for example when:
Wi-Fi Protected Setup (WPS) is disabled.
The router does not support WPS.
Some interference is preventing WPS from working.
1. You have two options:
Connect the Extender and your PC, Mac computer, or laptop using an Ethernet
cable,
-OR-
Connect a wireless-enabled PC, Mac, or laptop to Network Name:
WDRangeExtender.
Note: This is an open network without security.