User's Manual

WD111
User Manual
2016-02-05
4
1. Introduction
WD111 is a hosted IoE Smart Network module that enables wireless internet connectivity for any
device wishing to be monitored or managed remotely. The WD111 is architected for ultra-low
power consumption, with near-zero power consumption in power down modes with fast wakeup.
This module comes with a single band 1-stream 11n radio Qualcomm QCA4002 and a NXP
LPC54 processor in ARM Cortex-M4 operating at frequencies up to 100MHz. This module has
an extra 2MByte flash memory, in addition to the flash memory internal to the MPU.
2. Features
 2.412-2.484 GHz for worldwide market.
 IEEE 802.11n, single stream 1x1.
 Green TX power saving mode, Low power listen mode.

 Single Rx front end for multiple application.
 Full security support: WPS, WPA, WPA2, WAPI, WEP, TKIP.
 On-chip memory
 Serial interfaces: 4x USART, 2x SPI, 3x I2C
 ROM API support
 4power-saving modes and wake-up from power saving modes