User's Manual
Table Of Contents
- Before You Begin
- Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup Features
- Mounting the Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup
- Connecting the Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup
- Verifying the Hardware Installation
- Getting Started with the Configuration
- Suggested Next Steps
- Rebooting the Devices or Returning them to their Factory Default Settings
- Where to Go From Here
- Avant de commencer
- Caractéristiques du point d'accès bibande sans fil AC/N Cisco WAP371 avec configuration de point unique
- Montage du point d'accès bibande sans fil AC/N Cisco WAP371 avec configuration de point unique
- Connexion du point d'accès bibande sans fil AC/N Cisco WAP37 avec configuration de point unique
- Vérification de l'installation matérielle
- Configuration
- Étapes supplémentaires recommandées
- Redémarrage des appareils ou restauration des paramètres par défaut
- Pour en savoir plus
- 使用准备
- 具有单点设置功能的 Cisco WAP371 Wireless- AC/N 双频接入点
- 具有单点设置功能的 Cisco WAP371 Wireless- AC/N 双频接入点的安装
- 具有单点设置功能的 Cisco WAP371 Wireless- AC/N 双频接入点的连接
- 验证硬件安装
- 配置入门
- 建议的后续步骤
- 重启设备或恢复出厂默认设置
- 快速索引
6 Cisco Small Business WAP371 Series Wireless Access Point
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
NOTE If you need help resolving a problem, visit the Cisco Small Business Support
Community at www.cisco.com/go/smallbizsupport.
Label Activity Description
Power
Off The device has no power.
Solid Green The device is powered on. Normal operation.
Flashing Green Upgrading firmware or acquiring an IPv4 address.
Solid Red Booting or firmware upgrade failed.
WLAN
Off Wireless is disabled, for both 2.4 GHz and 5 GHz.
Solid Wireless is enabled.
Green Concurrent mode enabled. (The intensity needs to be
the same)
Amber 5 GHz is in use.
Blue 2.4 GHz is in use.
Flashing Transmitting or receiving data.
LAN
Off No Ethernet link.
Solid Green GE Ethernet link is active.
Solid Amber FE Ethernet link is active.
Flashing Transmitting or receiving data.
5