User's Manual
Table Of Contents
- Before You Begin
- Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup Features
- Mounting the Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup
- Connecting the Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup
- Verifying the Hardware Installation
- Getting Started with the Configuration
- Suggested Next Steps
- Rebooting the Devices or Returning them to their Factory Default Settings
- Where to Go From Here
- Avant de commencer
- Caractéristiques du point d'accès bibande sans fil AC/N Cisco WAP371 avec configuration de point unique
- Montage du point d'accès bibande sans fil AC/N Cisco WAP371 avec configuration de point unique
- Connexion du point d'accès bibande sans fil AC/N Cisco WAP37 avec configuration de point unique
- Vérification de l'installation matérielle
- Configuration
- Étapes supplémentaires recommandées
- Redémarrage des appareils ou restauration des paramètres par défaut
- Pour en savoir plus
- 使用准备
- 具有单点设置功能的 Cisco WAP371 Wireless- AC/N 双频接入点
- 具有单点设置功能的 Cisco WAP371 Wireless- AC/N 双频接入点的安装
- 具有单点设置功能的 Cisco WAP371 Wireless- AC/N 双频接入点的连接
- 验证硬件安装
- 配置入门
- 建议的后续步骤
- 重启设备或恢复出厂默认设置
- 快速索引
2 Cisco Small Business WAP371 Series Wireless Access Point
Welcome
Thank you for choosing the Cisco Small Business WAP371 Wireless Access Point.
The Cisco WAP371 is an indoor dual radio 802.11ac + 802.11n access point.
This guide is designed to familiarize you with the general layout of the access point,
describe how to deploy the device in your network, and describe how to configure the
device. Your access point has more features and functionality than what is described
in this guide. For additional information, see the Administration Guide. A link to the
Administration Guide is found in “Where to Go From Here” on page 11.
Package Contents
• Wireless Access Point
• Mounting kit
• This Quick Start Guide
• Product CD
• Ethernet cable
Before You Begin
Before you begin the installation, make sure that you have the following equipment
and services:
• A computer with browser support for:
– Internet Explorer v7.0 or later
– Chrome v5.0 or later
– Firefox v3.0 or later
– Safari v3.0 or later
• Tools for installing the hardware
• One or more Ethernet network switches with PoE
Cisco WAP371 Wireless-AC/N Dual Radio Access
Point with Single Point Setup Features
Front Panel
The front panel of the device consists of three lights: Power, WLAN, and LAN. For
full descriptions of the colors of the lights and their indications, see “Verifying the
Hardware Installation”.
1
2