User's Manual

10 Cisco Small Business WAP371 Series Wireless Access Point
Rebooting the Devices or Returning them to their
Factory Default Settings
To reboot your device:
• When the power supply is PoE, unplug your Ethernet connection for three seconds
and plug it back in.
or
• With the power on, press the Reset button with an opened paperclip for less than
three seconds, or until the lights go off.
– When all the lights go off, release the Reset button.
– Release the Reset button as soon as the lights go off, or you will restore the
device to factory default settings and lose your configurations.
To reset the device to factory default settings:
• With the power on, press and hold the Reset button with an opened paperclip for
more than 10 seconds.
– All of the lights will go off.
– Release the Reset button when the power light turns on.
8