User's Manual

11Mbps Wireless Ethernet Adapter User's Manual
20
4. Configuring the Ethernet Adapter
The Info Tab
(Connected with wireless LAN)
SSID: displays current SSID this
adapter uses.
If the adapter found no AP or any
other ad-hoc device, then SSID will
show “non-spec” . Please make
sure that your wireless LAN is
working properly under the effective
reach range of the adapter
Channel: displays the channel that
the adapter uses now.
BSSID: displays MAC address of the
AP that the adapter is connecting
with.
Transmission Rate: the transfer
data rate that the adapter is using in
wireless LAN
Link Quality (%): displays the
wireless LAN connection integrity
when connected to an AP.
MAC address: displays the unique
serial number burned into the
adapter that identifies itself from
other Ethernet devices.
IP address: displays the adapter’s
current IP address assigned by AP
or router.
Firmware Version: displays the
adapter’s current firmware version
Wireless Version: displays the
wireless module firmware version