UIW8001 and UIW4001 Ultra High-Definition IP Set-Top Boxes Installation Guide
Contents Change the Way You Watch TV...............................................................................................................................4 Identify Your Set-Top Box..............................................................................................................................................4 Safety First.....................................................................................................................................................................
Change the Way You Watch TV Safety First Available services may include some or all of the following features: Serial Number Welcome to Internet Protocol Television (IPTV). The UIW8001 and UIW4001 Ultra High-Definition Set-Top Boxes bring a rich, new set of interactive services directly to you through your TV and your in-home IP network.
UIW8001 and UIW4001 Front Panel UIW8001 and UIW4001 Back Panel 2 3 5 4 6 1 T16708 1 1 WPS button Press to pair with Wireless Access Point. 2 Signal Strength Indicator Identifies the strength of the wireless connection. 3 Link LED Indicates network link status. The LED is green. 4 Bluetooth LED Indicates when a Blutooth Remote is paired with the set-top. The LED is blue.
To connect your set-top box to your network and home entertainment devices, complete these steps: Make one of the following connections for your home network: 2 • If your home network uses Ethernet (CAT-5) cable, use the NETWORK connector on the set-top box. See page 9 Make the connections for your TV, VCR, and DVD recorder as follows: 3 4 5 8 • If you are using an HDTV, see page 10 and the connection diagrams in this guide.
Connections for a High-Definition TV (HDTV) Connections for a Standard-Definition TV (SDTV) Although all connections provide you with quality service, we list the connections in our recommended order. Although all connections provide you with quality service, we list the connections in our recommended order.
Connections for a VCR or DVD Recorder When using the receiver with a VCR or DVD recorder, you must make one of the following connections to view content. Connecting to an HDTV with an HDMI Connector Cable Used in this Configuration Although all connections provide you with quality service, we list the connections in our recommended order.
Connecting to an HDTV with a DVI Connector Connecting to an HDTV with a Mini-DIN Connector Cables Used in this Configuration Cables Used in this Configuration • 1 HDMI-to-DVI cable or 1 HDMI cable and 1 HDMI-to-DVI adapter • 1 Mini-DIN cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV’s capabilities.
Connecting to an SDTV with a Mini-DIN Connector Connecting to a Stereo VCR or DVD Recorder (optional) Cables Used in this Configuration The diagram below shows how to connect a recording device to your receiver. Although it is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this connection may not provide the best picture, and HDTV users are restricted to an SD format.
Troubleshooting If the set-top box does not perform as expected, the following tips may help. If you need further assistance, contact your service provider.
Picture Formats What Is the Difference Between a Standard-Screen and a Wide-Screen HDTV? The type of screen your HDTV has (wide-screen or standard-screen) determines how the set-top box displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio and screen resolution and is different for standard-screen and wide-screen HDTVs. What Is Aspect Ratio? An aspect ratio is the ratio of the width to the height of the TV screen.
SAFETY INSTRUCTIONS AND REGULATORY NOTICES BEFORE YOU START INSTALLATION OF OR USE THIS PRODUCT, CAREFULLY READ THESE INSTRUCTIONS When using this product, always follow the basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: • Always install the product as described in the documentation that is included with your product. • Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Symbols Following symbols may be found in this and accompanying documentation as well as on the product or accompanying accessories: Symbol Indication This symbol is intended to alert you that uninsulated voltage within this product may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this product.
Environmental information Energy efficiency Energy savings - We have a role to play… Technicolor is proud to offer you highstandard products with a variety of ecofriendly attributes. Next to carefully selected plastics and packaging to minimize our ecological footprint, our products benefit from a unique combination of hardware and software features that reduce energy consumption substantially.
Clause 2.5 and rated as indicated on the label on your product. It must be tested and approved to national, or local standards. • For US and Canada: This product is intended to be supplied by a UL listed Direct Plug-in Power Unit marked "Class 2" and rated as indicated on the label on your product. Only use the power supply unit that is supplied with this product. The use of other types of supplies is prohibited.
• If the product has been exposed to rain or water. • If the product does not operate normally. • If the product has been dropped or damaged in any way. • There are noticeable signs of overheating. • If the product exhibits a distinct change in performance. Immediately disconnect the product if you notice it giving off a smell of burning or smoke. Under no circumstances must you open the equipment yourself; you run the risk of electrocution.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Si le produit est équipé d'un émetteur-récepteur sans fil fonctionnant dans la bande des 2.4 GHz, il utilise uniquement les canaux 1 à 11 (2 412 à 2 462 MHz) sur le territoire canadien. Si le produit est équipé d'un émetteur-récepteur sans fil fonctionnant dans la bande des 5 GHz, il peut uniquement être utilisé dans un environnement intérieur.
ne peut être remplacée par un non-professionnel; il n'y a dès lors pas de raison de l'ouvrir. L'ouverture ou le retrait des couvercles peut vous exposer à des tensions dangereuses. Un remontage incorrect peut entraîner un choc électrique lors de l’utilisation suivante. Si votre appareil doit être réparé ou révisé, confiez-le à un distributeur agréé.
Alimentation électrique L'alimentation du produit doit respecter les spécifications en matière d'alimentation figurant sur les étiquettes. Dans le cas où ce produit est alimenté par un bloc d'alimentation : • L'alimentation doit être de classe II, être une source à puissance limitée conformément aux exigences de la norme CEI 60950-1/ EN 60950-1, clause 2.5, aux caractéristiques nominales comme indiquées sur l’étiquette fixée sur le produit. Elle doit être testée et répondre aux normes nationales ou locales.
Environnement Efficacité énergétique Économies d'énergie – Vous avez un rôle à jouer... Technicolor est fier de vous offrir des produits de haute-standard avec une variété d'attributs écologiques. A côté de soigneusement sélectionnés plastiques et emballages pour minimiser notre empreinte écologique, nos produits bénéficient d'une combinaison unique de fonctionnalités matérielles et logicielles qui permettent de réduire considérablement la consommation d'énergie.
que sur le produit ou les accessoires d'accompagnement : Symbol Indication Ce symbole a pour but d’alerter toute personne qu’un contact avec une pièce interne de ce produit, sous tension et non isolée, pourrait être suffisant pour provoquer un choc électrique. Il est donc dangereux d’être en contact avec toute pièce interne de ce produit. ! Ce symbole a pour but de’ avertir qu’une documentation importante sur le fonctionnement et l’entretien accompagne ce produit.
CONSIGNES DE SÉCURITÉ ET INFORMATIONS RÉGLEMENTAIRES AVANT D’INSTALLER OU D’UTILISER LE PRODUIT, LISEZ ATTENTIVEMENT CES INSTRUCTIONS Afin d’éviter tout risque d’incendie, de choc électrique et de blessure corporelle, il convient d’utiliser le produit conformément aux mesures de sécurité de base, parmi lesquelles les suivantes : • Respectez toujours les instructions d’installation détaillées dans la documentation accompagnant le produit. • Évitez de connecter ou d'utiliser ce produit en cas d'orage.
