User Manual

72
Local network configuration
ì
Select your network adapter from the selection list.
ì
Click Release and then Renew.
If the default IP address of the router/access point (192.168.254.254) was not changed,
the IP address should now read 192.168.254.x (with x being a number between 1 and
253). The Subnet Mask must always be the same as that set on the Gigaset SE587
WLAN dsl (normally 255.255.255.0) and the Default Gateway must have the IP
address of the router/access point (192.168.254.254). These values confirm that your
Gigaset SE587 WLAN dsl is working.
ì
Click OK to close the IP Configuration window.