User Manual

71
Local network configuration
If the default IP address of the router/access point (192.168.254.254) was not changed,
the IP address should now read 192.168.254.x (with x being a number between 1 and
253). The Subnet Mask must always be the same as that set on the Gigaset SE587
WLAN dsl (normally 255.255.255.0) and the Default Gateway must have the IP
address of the router/access point (192.168.254.254). These values confirm that your
Gigaset SE587 WLAN dsl is working.
ì
Enter exit and press the Enter key to close the Command Prompt window.
Windows 98 SE, ME
ì
Click Start – Run.
ì
Enter WINIPCFG and click OK.
There may be a slight delay before the IP Configuration window appears.