User Manual

42
Administration
ì
Specify which information is to be displayed from the option menu. You can choose
between the following levels:
ì
Click Refresh to display the desired information.
ì
Click Clear to remove logged information from the screen and delete it from the
device's memory.
Factory Defaults
You can reset the Gigaset SE587 WLAN dsl to the factory settings. You should do this
only if you want to make the device available to others or exchange it through the
dealer. In this case unauthorized persons could use the Internet access data at your
expense.
ì
In the Administration menu, select Factory Defaults.
ì
Select Reset to factory default settings and click Reset.
A window will appear prompting you to confirm the procedure.
All events All events are displayed.
Configuration errors Only configuration errors are displayed.
Syslog messages All events contained in the system log are displayed.
W
Do not perform this action without first consulting your Internet service
provider’s hotline.
Note:
If the Gigaset SE587 WLAN dsl is not operating correctly, you can reboot it by switch-
ing it off and restarting it. It should then be ready for use again.
Please bear in mind that when the device is fully reset, all configuration settings are
returned to the factory settings. This means that you will have to completely reconfig-
ure the Gigaset SE587 WLAN dsl.