User Manual

41
Administration
Remote Management
You can decide if remote access to the configuration user interface of your Gigaset
SE587 WLAN dsl is to be enabled or not. It is disabled by default.
The port number a remote user will have to enter in the browser’s address bar for remote
management is 80. This means that, if the router’s public IP address is for example
12.34.56.78, the user will have to type http://12.34.56.78:80 into the browser's address
bar to access the user interface of the Gigaset SE587 WLAN dsl.
ì
To enable remote access, if disabled, click on Enable.
ì
To disable remote access, if enabled, click on Disable.
The action is executed immediately.
UPnP IGD (Universal Plug and Play)
UPnP allows devices to offer their own network services and automatically use services
offered in the network. UPnP IGD (Internet Gateway Device) comes with a solution for
routers which support NAT (Network Address Translation, see page 36). NAT traversal
for UPnP enables UPnP packages to pass through a router or firewall without problems
and without user interaction.
ì
Enable or disable the UPnP IGD feature.
ì
Click Save Settings to save and apply all the changes on this page.
Log
During operation important events and information about how the device functions
and possible problems are logged. The Log page displays the logged information.
ì
In the Administration menu, select Log.